5: Commands and Levels
EDS1100/2100 Command Reference
61
Specify the instance for the next lower level.
host mode sequential
Connects to the first host in the list that accepts the connection.
host mode simultaneous
Selects simultaneous connections to all hosts on the host list.
kill connection
Disconnects the active connect mode tunneling connection or
connections.
local port
<number>
Sets a specific port for use as the local port.
<number> = the number of the port to use.
no email connect
Discontinues sending email alerts upon establishing a connect
mode tunnel.
no email disconnect
Discontinues sending email alerts upon closing a connect mode
tunnel.
promote host
<number>
Promotes the identified host, exchanging it place with the host
above it,
to adjust the order of the defined hosts.
reconnect time
<milliseconds>
Sets the reconnect time value for tunneling connections
established by the
device in milliseconds.
<milliseconds> = timeout in milliseconds.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
show status
Displays tunnel connect status.
start character
<control>
Sets the connect mode start character.
The character may be input as text, control, decimal, or hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
write
Stores the current configuration in permanent memory.
device (device) level commands
auto show tlog
Continuously displays the internal trouble log.
auto show upload
Continuously displays the status of firmware upload.
clrscrn
Clears the screen.
default long name
Restores the default product long name.
default short name
Restores the default product short name.
dhrystone
Runs the Dhrystone benchmark program.
exit
Exit to the enable level.
long name
<name>
Sets the product long name, displayed in command mode and the
Web interface.
short name
<name>
Sets the product short name, displayed in command mode and the
Web interface.
<name> = maximum of eight characters.
show
Show system information
show buffer pool
Displays information about the various buffer pools.
show codefile memory
Displays memory utilization by code files.
show delta memory
Displays differences in memory utilization by code files or line
reference.
show eds2100
Show system information
