Lantronix EDS1100, Справочник по командам

Страница: 137 / 152

5: Commands and Levels
EDS1100/2100 Command Reference 137
<bytes> = number of bytes in the threshold.
timeout <milliseconds> Sets the timeout value for packing mode in milliseconds.
<milliseconds> = timeout value, in milliseconds.
trailing character <control> Sets the trailing character for packing mode.
The character may be input as text, control, decimal, or hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
write Stores the current configuration in permanent memory.
packing (tunnel-packing:1) level commands
clrscrn Clears the screen.
default packing mode Sets to default packing mode, which is "Disable"
default send character Removes the send character for packing mode.
default threshold Restores the default threshold.
default timeout Restores the default packing mode timeout.
exit Returns to the tunnel level.
no trailing character Removes the trailing character for packing mode.
packing mode disable Disables packing. Data is sent to the network when received.
packing mode send character Sets packing mode to accumulate data and transmit it upon
receiving the
configured send character on the line (serial port).
packing mode timeout Sets packing mode to accumulate data and transmit it after a
specified
amount of time (timeout).
send character <control> Sets the send character for packing mode.
The character may be input as text, control, decimal, or hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
show Displays the current configuration.
show history Displays the last 20 commands entered during the current CLI
session.
threshold <bytes>
Sets the threshold (byte count). If the queued data reaches this
threshold
then the data will be sent.
<bytes> = number of bytes in the threshold.
timeout <milliseconds> Sets the timeout value for packing mode in milliseconds.
<milliseconds> = timeout value, in milliseconds.
trailing character <control>
Sets the trailing character for packing mode.
The character may be input as text, control, decimal, or hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
write Stores the current configuration in permanent memory.
password (tunnel-accept-password:2) level commands
clrscrn Clears the screen.
exit Exits to the next higher level.
no password Removes the password so connections will be accepted