Lantronix Device Server MSS 485 Скачать руководство пользователя страница 6

Страница: 6 / 69

Introduction

1 - 1

1 - Introduction

The MSS485 is a multiprotocol serial server that provides Ethernet
connections for devices connected to an RS-485 network.

This manual explains how to install the MSS.

•

The remainder of this chapter outlines MSS functionality.

•

Chapter 2,

Installation

, explains how to install the MSS hardware

and boot the server.

•

Chapter 3,

Getting Started

, details different ways to log into the MSS

and prepare the server for configuration.

•

Chapter 4,

Configuration

, covers basic configuration.

•

Chapter 5,

Using the MSS

, provides an overview of how to use the

MSS interactively and with host applications.

•

Appendices provide information on Technical Support,
Troubleshooting, Pinouts, and Specifications.

•

The hypertext version of this manual, located on CD-ROM,
includes more specific information about configuring and using the
MSS and reloading MSS software.

Be sure to read the section of the configuration chapter that applies to the
protocol you are using (TCP/IP, IPX/SPX, or LAT).

For more detailed information on the MSS, including a complete
command reference, see the

MSS Reference Manual

located on the CD in

HTML, PDF, and PostScript formats.

To access the HTML version of the Reference Manual on the CD, use your
web browser’s

Open

Open File

command (usually in the

File

menu)

to open the file

index.htm

in the root directory of the CD. Then click on the

link to the

MSS Reference Manual

The PostScript and PDF versions of the MSS485 manuals are located in
the

manuals

directory of the CD. Use the Adobe Acrobat Reader (widely

available on the Internet at no charge) to read and print all or parts of the
manual from the file

mssref.pdf

Содержание Device Server MSS 485






































































Результаты поиска

Содержание Device Server MSS 485

Отзывы:

Lantronix Device Server MSS 485, Руководство по установке, Страница: 6 / 69

Результаты поиска

Содержание Device Server MSS 485

Отзывы: