Lantronix Device Server MSS 485 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 69

Lantronix Device Server MSS 485 Скачать руководство пользователя страница 43

Interactive Connections

Using the MSS

5 - 10

5.2.3.2 Show IPsecurity

This command shows the current TCP/IP security table, if one exists.
Addresses or ranges of addresses are listed according to the kind of
restrictions placed upon them.

5.2.3.3 Show NetWare

All necessary information related to IPX/SPX connections can be viewed
including the name of the NetWare loadserver and the number of frames
transmitted. Specifically, a user can find out which frame types are
enabled, if internal routing is enabled, and what internal network
number governs internal routing.

5.2.3.4 Show Node LAT/SPX

This command shows the LAT or SPX nodes that the MSS can see. For
LAT, the name of each service node is listed along with its identification
string and availability. For SPX, node information includes each node’s
socket number, hop count, frame type, and status.

5.2.3.5 Show Ports

This command displays the configuration and connection status of the
serial port. Settings such as flow control, baud rate, parity, and default
hosts are shown. In addition, users can view the port access type and
login status. Errors are summarized, although in less detail than those
shown by the Show Server Counters command.

5.2.3.6 Show Server Bootparams

This command displays MSS identification and boot procedure
information. The first lines display the MSS version, hardware address,
network name and node number, identification string, and how long the
MSS has been running. Software and ROM versions, configured
loadhosts, and startup files are also displayed.

5.2.3.7 Show Server Characteristics

This command displays network-related server identification
information including the MSS’s hardware address, node address, IP
address, domain, any configured gateways and nameservers, and the
subnet mask. In addition, inactivity and retransmission limits, password
restrictions, and the types of incoming logins permitted are shown.

«
...
41
42
43
44
45
...
»

Содержание Device Server MSS 485






































































Отзывы:

Нет отзывов