Lantronix Device Server MSS 485 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 69

Lantronix Device Server MSS 485 Скачать руководство пользователя страница 23

Incoming Logins

Getting Started

3 - 4

3.2 Incoming Logins

3.2.1 Controlling Incoming Logins

Incoming Telnet logins are enabled by default, and incoming LAT logins
are disabled. This behavior can be changed with the Change Incoming
command and one of the following parameters:

Telnet

Enables Telnet logins

LAT

Enables LAT logins

Both

Enables both Telnet and LAT logins

None

Disables Telnet and LAT logins

For security reasons, you may wish to disable incoming logins. If it is
undesirable to disable incoming logins, the MSS can be configured to
require a login password for incoming connections with the Change
Incoming Password

command. The incoming password feature can be

disabled with the Change Incoming Nopass command.

3.2.2 EZWebCon Login and Configuration

EZWebCon enables users on TCP/IP networks to log into and configure the
MSS. The program offers a simple interface that prompts the user for the
information necessary to configure the server.

Instructions for installing, running, and using EZWebCon are included on
the CD-ROM. Refer to the EZWebCon README file for specific platform
and host requirements.

3.2.3 Other Incoming TCP/IP Logins

3.2.3.1 Telnet

To log into the MSS, type “Telnet” followed by the MSS IP address.

Figure 3-3:

A Telnet Connection

Unlike Remote Console Logins (see page 3-5), incoming Telnet logins do
not require that the user enter a login password.

% telnet 192.0.1.88

«
...
21
22
23
24
25
...
»

Содержание Device Server MSS 485






































































Отзывы:

Нет отзывов