Lantronix Device Server MSS 485 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 69

Lantronix Device Server MSS 485 Скачать руководство пользователя страница 29

Protocol Configuration

Configuration

4 - 2

If another user is currently the privileged user for the MSS, use the Set
Privileged Override

command to forcibly become the privileged user. To

relinquish privileged status, enter the Set Noprivilege command.

The privileged password can be changed with the Change Privpass
command. Specify a new password of up to six alphanumeric characters.

Figure 4-2:

Changing Privileged Password

4.2.2 Login Password

The login password is required for remote console logins. The default
login password is access. To specify a new login password, use the
Change Loginpass

command and specify a new password of up to six

alphabetic characters.

Figure 4-3:

Changing Login Password

NOTE:

Default passwords may pose a security risk and should be
changed as soon as possible. This is especially true of the privi-
leged password.

4.3 Protocol Configuration

Certain options can be configured for each of the protocols supported by
the MSS. For more information on protocol configuration, refer to the
version of this chapter provided on CD-ROM.

4.3.1 TCP/IP Parameters

•

Subnet Mask

: This mask allows the server to decide at connection

time whether a given TCP/IP host is part of the local network seg-
ment so that packets can be routed properly. A default subnet mask
is created automatically when the MSS’s IP address is configured,
but it can be overridden.

Ex:

CHANGE SUBNET MASK 255.255.255.0

Local>> CHANGE PRIVPASS “walrus”

Local>> CHANGE LOGINPASS “badger”

«
...
27
28
29
30
31
...
»

Содержание Device Server MSS 485






































































Отзывы:

Нет отзывов