Lantronix
x4120 User Guide
33551 Rev. C
Page
63
of
142
6. If the problem persists, contact Technical Support.
Fail to get port type!
This message indicates that a port level command was entered for the IONMM but the command is only
valid for the other types of slide-in modules.
1. Use the
go
command to change location of where the command operates.
2. Retry the operation. For a complete list of the available commands, see the
x4120 CLI Reference
Manual, 33497
.
3. If the problem persists, contact Technical Support.
Failed to set DHCP client state!
This message indicates a problem in the DHCP setup / configuration.
1. Verify the operation in the “
Assigning a Dynamic IP Address
” section on page
41
.
2. Retry the operation. See the related DHCP command in
the x4120 CLI Reference Manual, 33497
.
3. If the problem persists, contact Technical Support. US/Canada: 1-800-260-1312, International: 00-1-
952-941-7600.
Failed to set current time
Failed to set SNTP state!
Failed to set SNTP daylight savings time state!
Failed to set timezone!
Failed to set SNTP server
Failed to set SNTP server!
Failed to set system contact
Failed to set system name
Failed to set system location!
These messages indicate a problem in the SNTP setup / configuration.
1. Make sure this is the command / function you want.
2. See the commands in
the x4120 CLI Reference Manual, 33497
.
3. If the problem persists, contact Technical Support.
