Lantech IPES-3408 Series Скачать руководство пользователя

Страница: 4 / 59

for Authentication*

SMTP/Text SMS

Supports SMTP Server and 6 e-mail accounts for

receiving event alert; can send SMS text alert via mobile

Spanning Tree

Supports IEEE802.1d Spanning Tree and IEEE802.1w

Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree

Quality of Service

The quality of service determined by port, Tag and IPv4

Type of service, IPv4 Different Service

Class of Service

Supports IEEE802.1p class of service, per port provides 4

priority queues

IP Security

Supports 10 IP addresses that have permission to access

the switch management and to prevent unauthorized

intruder.

Login Security

Supports IEEE802.1X Authentication/RADIUS

Port Mirror

Support 3 mirroring types: RX, TX and Both packet

IGMP

Support IGMP snooping v1,v2,v3; Supports IGMP static

route

256 multicast groups and IGMP query

Multicast VLAN

Registration*

MVR enables multicast packets go through VLAN for VOD

application

Bandwidth

Control

Support ingress packet filter and egress packet limit.

The egress rate control supports all of packet type.

Ingress filter packet type combination rules are

Broadcast/Multicast/Flooded Unicast packet,

Broadcast/Multicast packet, Broadcast packet only and all

types of packet.

The packet filter rate can be set an accurate value through

the pull-down menu for the ingress packet filter and the

egress packet limit.

RTC

Built-in Real Time Clock to keep track of time always

Flow Control

Supports Flow Control for Full-duplex and Back Pressure

for Half-duplex

System Log

Supports System log record and remote system log server

SMTP

Supports SMTP Server and 6 e-mail accounts for receiving

event alert

Relay Alarm

Provides one relay output for port breakdown, power fail

Alarm Relay current carry ability: 1A @ DC24V

SNMP Trap

1. Topology Change

2. Power Trap

3. MAC-Violation

DHCP

Provides DHCP Client/ DHCP Server/ Port and IP Binding

DNS

Provides DNS client feature and supports Primary and

Secondary DNS server

SNTP

Supports SNTP to synchronize system clock in Internet

Firmware Update

Supports TFTP firmware update, TFTP backup and restore.

Configuration

Upload/Download

Supports text configuration file for system quick installation;

Support factory reset button to restore all settings back to

factory default.

Содержание IPES-3408 Series




























































Результаты поиска

Содержание IPES-3408 Series

Отзывы:

Похожие инструкции для IPES-3408 Series

Бренды по названию

Популярные бренды

Lantech IPES-3408 Series, Руководство пользователя

Результаты поиска

Содержание IPES-3408 Series

Отзывы:

Похожие инструкции для IPES-3408 Series

Бренды по названию

Популярные бренды