Lantech IPES-3408 Series, Руководство пользователя

Страница: 22 / 59

42
<0> Login: User Login.
<1> Boot: System Boot.
<2> Din1: Din Event 1 is triggered.
<3> Din2: Din Event 2 is triggered.
<4> Power1: Power 1 conditions.
<5> Power2: Power 2 conditions.
Link Event Actions
Select an Event to Add.
Fault Relay Configuration
Configure Fault Relay on this page.
Power Failure:
Power: It's triggered when power failure.
Port Link Down/Broken
Port: It's triggered when port link down.
43
6.4.7 Digital Input / Output Configuration
This device contains two digital outputs and two digital inputs. Outputs are open-
collector transistor switches that may be controlled by the host computer. They
provide messages, which can be applied to heaters, pumps, and other electrical
equipment. The digital inputs may be read by the host computer and used to sense
the state of a remote digital signal.
Digital Input
When First/Second Digital Input function is enabled, First Digital Input/Second Digital
Input will then be available respectively. Digital Input: Choose the transition type to
trigger DI0/DI1.
Low->High: Having focused this radio button, DI0/DI1 will only report the status when
the external device's voltage changes from low to high.
High->Low: Having focused this radio button, DI0/DI1 will only report the status when
the external device's voltage changes from high to low.
Event Description: Please fill in the description for the event.