Lanpro LP-1522, Руководство пользователя

Страница: 13 / 36

www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-1522 User Manual
13
Wireless - Advanced Settings
These settings are only for more
technically advanced users who have
a suffi cient knowledge about wireless
LAN.
These settings should not be changed
unless you know what effect the
changes will have on your WLAN AP
Router.
Screen snapshot
Wireless Advanced Settings
Item Description
Authentication Type Click to select the authentication type in Open System, Shared Key or Auto selection.
Fragment Threshold
Set the data packet fragmentation threshold, value can be written
between 256 and 2346 bytes. Refer to 4.10 What is Fragment
Threshold? Refer to 4.10 What is Fragment Threshold?
RTS Threshold
Set the RTS Threshold, value can be written between 0 and 2347 bytes. Refer to 4.11
What is RTS(Request To Send) Threshold?
Beacon Interval
Set the Beacon Interval, value can be written between 20 and 1024 ms. Refer to 4.12
What is Beacon Interval?
Data Rate
Select the transmission data rate from pull-down menu. Data rate can be auto-select,
11M, 5.5M, 2M or IMbps.
Preamble Type
Click to select the Long Preamble or Short Preamble support on the
wireless data packet transmission. Refer to 4.13 What is Preamble Type?
Broadcast SSID
Click to enable or disable the SSID broadcast function. Refer to 4.14
What is SSID Broadcast?
IAPP
Click to enable or disable the IAPP function. Refer to 4.20 What is
Inter-Access Point Protocol(IAPP)?
802.1 lg Protection Protect 802.1 lb user.
RF Power Level Select the TX Power from 18-19dBm to 24-26dbm.
ACK Timeout
The Acknowledgement Timeout means from remote to local data
transmission, one parameter to control both acknowledging action to
guaranty those packets have already be received. Usually, for short
distance, keep default setting is proposed. If there is long distance
application, have minor increased with this parameter will be proposed.
Apply Changes Click the Apply Changes button to complete the new confi guration setting.
Reset Click the Reset button to abort change and recover the previous confi guration setting.
3.3.5