www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-1522 User Manual
For Microsoft Windows 2000/XP:
1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear.
2. Move mouse and double-click the right button on Network and Dial-up Connections icon. Move mouse and double-
click the Local Area Connection icon. The Local Area Connection window will appear. Click Properties button in the Local
Area Connection window.
3. Check the installed list of Network Components
. If TCP/IP is not installed, click the
Add
button to install it; otherwise
go to step 6.
4. Select
Protocol in the Network Component Type
dialog box and click
Add button.
5. Select TCP/IP in Microsoft of Select Network Protocol
dialog box then click OK button to install the TCP/IP protocol,
it may need the Microsoft Windows CD to complete the installation. Close and go back to Network
dialog box after the
TCP/IP installation.
6. Select
TCP/IP and click the properties button on the Network
dialog box.
7. Select
Specify an IP address
and type in values as following example.
• IP Address:
192.168.1.1
, IP address within the range of 192.168.1.1 to 192.168.1.253 is used to connect the WLAN AP
Router.
• IP Subnet Mask:
255.255.255.0
7
For Microsoft Windows NT:
1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear.
2. Move mouse and double-click the right button on Network icon. The Network window will appear. Click Protocol tab from
the Network window.
3. Check the installed list of Network Protocol window. If TCP/IP is not installed, click the Add button to install it; otherwise
go to step 6.
4. Select Protocol in the Network Component Type dialog box and click Add button.
5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install the TCP/IP protocol, it
may need the Microsoft Windows CD to complete the installation. Close and go back to Network dialog box after the TCP/
IP installation.
6. Select TCP/IP and click the properties button on the Network dialog box.
7. Select Specify an IP address and type in values as following example.
- IP Address: 192.168.1.1
, IP address within the range of 192.168.1.1 to 192.168.1.253 is used to connect the WLAN AP
Router.
- IP Subnet Mask: 255.255.255.0
8. Click OK to complete the IP parameters setting.
