Lankota CK1100, Руководство пользователя

Страница: 16 / 38

5/19/2021 www.lankota.com | Lankota Inc. Page | 16
Lankota is a registered trademark of Lankota Group.
Setup
1. Use a tractor that has 120+ hp (at PTO) and has 1000 rpm PTO.
2. Slide the correct PTO half - shaft onto the mill and set it in the PTO rest.
3. Attach the hammer mill to the 3 - point of the tractor. The 3 - point arms
can be adjusted forward or backward depending on the tractor.
4. Connect the PTO driveshaft and the hydraulic hoses.
•
There are two pairs of hoses—one set is for chute rotation and the
other for deflector up and down. Turn the hydraulic FLOW DOWN
for both SCVs.