Lanier Copier System Edition, Руководство по эксплуатации

Страница: 553 / 1270

Basic Copying
52
1
Note
❒
You cannot change stapling positions during copying.
❒
When the original image is rotated, the stapling direction turns by 90
°
.
❒
In “Top 2” displayed on the Copy Initialization screen, you can select either
“Top 2” or “Bottom”.
❒
When using Staple with “1 Sided 2 Pages
→
Combine 1 Side”, “1 Sided 4 Pag-
es
→
Combine 2 Sided” in Combine mode or Double Copies, select
K
original
for
L
copies and
L
original for
K
copies.
❒
When using “Top Slant”, “Left 2” or “Top 2” with “1 Sided
→
1 Sided”, “1
Sided
→
2 Sided”, “2 Sided
→
1 Sided”, or “2 Sided
→
2 Sided” in Combine
mode or Double Copies, select
K
original for
L
copies and
L
originals for
K
copies.
❒
When using “Top Slant”, “Left 2” or “Top 2” with Combine, Double Copies
or Auto Reduce/Enlarge modes, the “Blank part will appear. Check orienta-
tion.” message may be displayed depending on the orientation of papers and
originals. In this case, change the paper orientation.
❒
The maximum original image size that can be rotated is as follows:
❒
When selecting “Top Slant“, “Left 2“, or “Top2“, the following settings will
make a suitable image rotation:
•
[ Auto Reduce/Enlarge ] or [ Auto Paper Select ]
• Setting [ Auto Tray Switching ] to [ With image rotation ] in the Copy Initialization
settings
AAAA
Select one of the stapling positions.
Note
❒
When you select the stapling position, the Sort mode is automatically se-
lected.
Reference
⇒
p.51 “Stapling position and original setting”
Metric version A4
Inch version
8
1
/
2
"
×
11"