Landoll VT Plus 7550, Руководство оператора

Страница: 89 / 96

OPERATION AND MAINTENANCE
4-21
Figure 4-20: Hitch, Speed Identification Symbol,
and Safety Chain
c. When unhitching from the tractor attach the hook
end of the chain to a free link close to the hitch
clevis for storage. This will keep the hook off the
ground, reducing corrosion and keep the hook
functioning properly.
d. Regularly inspect the safety chain for worn,
stretched, or broken links and ends. Replace the
safety chain if it is damaged or deformed in any
way.
7. Check that tires are of proper size, load rating, and
inflated to manufacture specifications before
transporting. Check wheel lug bolts to insure
tightness.
8. Know the transport heights and widths of the unit
before transporting. Attachments such as leveling
harrows can increase the transport dimensions of the
implement. Use caution when transporting near
bridges and power lines.

WARNING
9. Raise the unit to full transport height.
10. Install transport locks on both lift and fold systems.
Do not depend solely on implement hydraulics for
transport.
( See Figure 4-21. )

WARNING
11. Transport during daylight hours whenever possible.
Always use flashing warning lights, except where
such use is prohibited by law. Make sure lights,
reflectors and SMV emblem are clearly visible and
operating. Remove any obstructions such as dirt,
mud, stalks or residue that restricts view before
transporting.
12. To increase stability and reel clearance on center
frame, use hydraulic leveler to roll the unit forward.
Figure 4-21: Installed Transport Locks
Electrocution can occur without direct contact.
SAFETY
CHAIN
SPEED
DECAL
Failure to use transport lock during transport
may result in permanent equipment damage,
serious injury, or death.
CENTER LIFT TRANSPORT
LOCK ENGAGED
IMPORTANT: BE SURE WING LOCK PIN HOLE
IS ALIGNED IN REAR HOLE OF LOCK MOUNT
AND 3/8 X 1-1/2 LOCK PIN IS SECRUED
THROUGH ALIGNED HOLES IN FOLDED
TRANSPORT POSTITION
WING
STABILIZER