Landoll VT Plus 7550, Руководство оператора

Страница: 74 / 96

4-6 F-987-0519
OPERATION AND MAINTENANCE
Folding the 7550 VT
1. Fully raise the machine.
IMPORTANT
Be sure wing lock pin hole is aligned in front hole of
lock mount and the 3/8 x 1-1/2 lock pin is secured
through aligned holes before folding machine.
2. Begin folding the machine. Transport locks will
engage on the center lift as the outer wings are
folding, fully fold all inner and outer wings
( See
Figure 4-5. and See Figure 4-6. ).
3. Take note that both center lift transport locks are
engaged. Lower machine to locks and continue to
hold lever, this will allow the inner and outer wing
transport wheels to retract, reducing the transport
width. It is not necessary to do this for transport if
operator chooses not to.
4. When the unit is fully folded, rotate and slide wing
lock pins rearward to engage wing lift transport locks
( See Figure 4-6. )
Figure 4-5: Stored Transport Locks
WING FOLD
PLATES
CENTER LIFT TRANSPORT
LOCK DISENGAGED
IMPORTANT: BE SURE
WING LOCK PIN HOLE IS
ALIGNED IN FRONT
HOLE OF LOCK MOUNT
AND 3/8 X 1-1/2 LOCK
PIN IS SECRUED
THROUGH ALIGNED
HOLES BEFORE
FOLDING WINGS