manualshive.com logo in svg

Landoll Drexel SLT30 AC, Руководство оператора

Поделиться
Скачать
Landoll Drexel SLT30 AC Скачать руководство пользователя страница 80

5-14

OPERATOR’S DAILY CHECKLIST

Joystick Directional Switch

Rock the directional switch forward 
to put the truck in forward operation. 
The wheel direction display on the 
dash should show the truck to be in 
the forward direction. Press on the 
accelerator to check. Repeat for the 
reverse direction by rocking the 
direction switch backwards. 

The static return to “OFF” (SRO) is a 
built in safety feature to prevent 
accidental truck movement. To 
check the SRO:

1.

Get in the operator’s seat, drive 
the truck forward, and then 
come to a stop. Leave the 
directional control switch in the 
forward position and turn the 
key switch to the “OFF” position.

2.

Turn key switch back to the “ON” 
position and then press on the 
accelerator. The truck should 
not move. Cycle the directional 
switch to neutral and then back 
to forward. The truck should 
now operate correctly.

3.

Next, drive the truck forward and 
come to a stop leaving the 
directional control switch in the 
forward position.

Lift yourself out of the seat for three 
seconds. Sit back down and then 
press on the accelerator. The truck 
should not move without cycling the 
directional switch back through 
neutral.

Joystick Wire Guidance 
(Optional)

If your truck is equipped with wire 
guidance sit in the driver’s seat and 
turn the truck on. Press the wire 
guidance button on the joystick and 
listen for a slow beeping noise. Also 
look at the dash display for WIRE 
ON to be displayed. If abnormalities 
are found remove the truck from 
service and repair.

Joystick Auxiliary Function 
(Optional)

If your truck is equipped with an 
auxiliary hydraulic attachment such 
as a fork positioner sit in the driver’s 
seat and turn the truck “ON”. Press 
and hold the auxiliary function 
button on the joysticks moving the 
joystick forward and aft. Watch the 
attachment to determine if it 
functions properly. If abnormalities 
are found remove the truck from 
service and repair. 

Joystick Horn

Press the horn button located on top 
of the joystick to make certain the 
horn sounds when button is pushed.

Lights and Alarm

Check lights for proper on/off 
operation. Check that alarms sound 
when intended. Repair and/or 
replace as needed.

https://www.forkliftpdfmanuals.com/

Содержание Drexel SLT30 AC



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды