Landoll Drexel SLT30 AC, Руководство оператора

Страница: 48 / 90

4-4
OPERATING THE SLT30 AC TRUCK
Steering Wheel and
Tilt Clamp

CAUTION
The steering wheel is equipped with
a steering knob, which should be
held firmly with your left hand at all
times. See Figure 4-5.
Figure 4-5: Steer Weel & Tilt
Clamp
The steering column tilt and height
are adjustable.
To adjust the tilt angle, loosen the tilt
clamp (or lever), adjust the angle of
the steering column and tighten the
tilt clamp. See Figure 4-5.
To adjust the steering wheel height,
loosen the telescoping clamp (or
lever), adjust the height of the
steering column, and tighten the
telescoping clamp. See Figure 4-5.
Rock the column gently forward and
back to ensure the levers are tight.
As you increase the speed of the
truck the steering will get less
sensitive. Also as you increase the
angle of the steer wheel the
maximum possible speed of the
truck will be reduced. These
features are both implemented to
make driving the SLT30 AC truck as
safe as possible.
Key Switch
The key switch is located to the right
of the steering column beside the
dash display. See Figure 4-5. Insert
the key and rotate clockwise to
operate the truck. Make sure the
direction control switch is in neutral
before switching on. All load controls
and the accelerator should be in
neutral (i.e. not depressed).
DO NOT depress the accelerator
during startup.
Dash Display
The dash display is located to the
right of the steering wheel. See
Figures 4-5 and 4-6. It is comprised
of the following features:
1. Headlights Switch (where fitted)
- Pressing this button will turn
the headlights on. Once the
lights are on, pressing and
holding the button for 3 seconds
will turn them off.
Adjusting the steering column
while driving the truck is
dangerous. The movement of
the column could startle or
confuse you causing you to
lose control of the truck.
Adjust the steering column
only when the truck is still.
https://www.forkliftpdfmanuals.com/