manualshive.com logo in svg

Landoll Drexel SLT30 AC, Руководство оператора

Поделиться
Скачать
Landoll Drexel SLT30 AC Скачать руководство пользователя страница 73

OPERATOR’S DAILY CHECKLIST

5-7

WARNING

NOTE

If the truck has been shipped with 
the battery installed first remove the 
battery from the truck.

Removing the Battery From 
Truck

Replacing the battery requires a lift 
and support apparatus capable of 
supporting the weight and size of 
the battery. Check the capacity plate 
for battery information.

An external battery roller tray stand 
is also helpful and will allow the 
battery to be pushed into the 
compartment. This is available from 
your Landoll distributor.

To remove the battery:

1.

Return the truck to your service 
charging area.

2.

Set the key switch to “OFF” and 
remove the key.

3.

Place blocks in front of and 
behind all wheels.

4.

See Figure 5-3.

5.

Remove battery door from the 
forklift.

6.

Disconnect the battery/truck 
cable disconnect and lay the 
battery cable across the battery.

7.

Remove battery restraint and 
slide the battery out of the truck.

• Always assume that the 

battery is emitting explosive 
hydrogen gas and practice 
proper safety precautions.

• DO NOT smoke, use open 

flame, create arcs or sparks 
near the battery.

• Consult the label on your 

battery for information on 
cell-type, ampere-hour 
capacity, charge rate and 
normal full-charge voltage. 

•  DO NOT charge the 

battery at a current greater 
than 1.5 amp per 100 
amp-hours capacity at the 
end of the charge.

• Packaged with every 

battery are specific 
instructions for battery care 
and a Material Safety Data 
Sheet(MSDS). Read these 
documents thoroughly 
before performing any 
service to the battery.

• NEVER place any tool or 

metal object on top of the 
battery where it could 
possibly touch battery 
terminals and cause a short 
or serious electrical shock.

https://www.forkliftpdfmanuals.com/

Содержание Drexel SLT30 AC



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды