Landoll Drexel SLT30 AC, Руководство оператора

Страница: 25 / 90

Chapter 3
3-1
Understanding SLT30AC Truck
This section of your SLT30 AC
Forklift Operator’s Manual contains
information that will familiarize you
with the basic design and operating
principles of your SLT30 AC forklift.
Vehicle Description
The SLT30 AC is a very narrow aisle
type lift truck. The principle lifting
capability is accomplished by the
weight of the load, which is carried
on the forks in front of the drive
wheels, being offset by the
combined weight of the heavy truck
chassis and its battery.
The SLT30 AC forklift is available in
a 3,000 and 3,500 lb. capacity. The
mast can be pivoted 90° to the right
as well as side shifted. This permits
the vehicle to act as a conventional,
as well as a narrow aisle sideloader
forklift.
The SLT30 AC Model truck also
includes:
• A three-wheel configuration with
dual front wheel, single rear
wheel steering and drive.
• Joystick operation for load
functions, utilizing one joystick
for mast operations (raise/lower,
tilt, pivot, and sideshift). A fifth
(5th) function hydraulic valve is
available for an approved Class
II attachment.
• 48-volt lead-acid battery that
provides power for the electric
system, the lights, and other
auxiliary equipment.
• Triplex or quadplex high visibility
mast configurations.
• Lift capacity 3,000 lbs./1,363
Kg. at 24"/600mm load center
for SLT30 AC and 3,500
lbs./1,588 kg at 24"/600mm load
center for SLT35 AC.
• Ergonomically designed
operator compartment that
includes sit-down operator
position, adjustable driver’s
seat, tilt/telescoping steering
wheel, hand operated joystick
with direction control switch,
horn, wire guidance switch and
auxiliary hydraulic function
switch with an armrest.
• Safety interlocks with key switch
activation and operator seat
safety switch. Also an electrical
return to neutral lockout
requires the direction control
switch to be in the neutral or
center position before drive can
be restored.
• Automatic spring applied
electric release parking brake.
• Machine model, serial and
option numbers (where
applicable) are stamped on the
capacity nameplate affixed to
the right of the operator’s
compartment. See Figure 3-2.
https://www.forkliftpdfmanuals.com/