Landoll Brillion WFPC23, Руководство оператора

Страница: 68 / 78

4-8 F-1108-0121
TABLE OF CONTENTS
Roller Axle Assembly
After an initial run of 5-10 hours, check the Roller Axle
Assemblies to ensure that the wheels are tight to one
another. If not, starting at the welded stop end, slide the
wheels tight together and adjust the Axle Clamps so that
it’s against the wheel.
See Figure 4-5. If there is a gap
between the Axle Clamp and the Wheel Stop, install the
appropriate clamp spacers.
See Figure 4-7 and 4-8.
Clamp Tightening
Tighten the Clamp bolts evenly to achieve equal spacing
between clamp section. Torque to 75 ft-lbs. Thereafter
check assemblies every 50-100 hours.
See Figure 4-6.
Figure 4-5: Roller Axle Assembly
Figure 4-6: Clamp Tightening
Flange Bolt,
1/2-13 x 2-1/2
Flange
Locknut,1/2-13
Wheel Stop
Axle Clamp
Wheel
Torque to 75 Ft/Lbs
Flange Bolt,
1/2-13 x 2-1/2
Flange
Locknut,1/2-13
Axle Clamp
Wheel