Landoll Brillion WFPC23, Руководство оператора

Страница: 54 / 78

3-6 F-1108-0121
TABLE OF CONTENTS
General Operation
1. Horsepower requirements will vary due to speed,
moisture, residue and types of soils. Local dealers
can help in making recommendations for your
conditions.
• The minimum horsepower requirement as an
Independent Tool is 3-5 horsepower per foot of
rolling width.
• The minimum horsepower requirement as a
Companion Tool is 1-3 horsepower per foot of
rolling width.
2. Operating speed is typically 5-8 mph. Reduce speed
in rocky conditions to prevent wheel breakage.
3. Wings should always unfold first, then machine
lowers. If not, reduce hydraulic fluid flow.
4. With machine unfolded and lowered on a level
surface, adjust the Turnbuckle so the that each Wing
Roller is at the lower 1/3 of its respective Guide Slot.
See Figure 3-5.
5. During field operation, it is not necessary to raise the
machine for turns, but turns should be as wide as
possible.
WARNING
Figure 3-5: Wing Guide Slot
Watch out for Overhead Electrical Wires and
other Overhead Obstructions when folding and
unfolding Pulverizer Wings.
Guide Slot
Wing Roller
Wing
Cylinder
Lift Cylinder
Turnbuckle
Front
Drawbar
Center Frame
RH Wing