Landis P-220, Руководство оператора

Страница: 4 / 13

4
INSTALLATION
The Landis Sander should be located on a flat, firm surface, in an area
free of obstructions that could interfere with the safe operation of the
equipment. The Sander should be positioned, leveled and the wheels on
a locked position.
WARNING:
All electrical work must be performed by a qualified
electrician and must conform to all state and local
ordinances.
Do not, under any circumstance, tamper with, modify,
or adapt the electrical plug and cord provided with this
machine.
ELECTRICAL CONNECTIONS
Electrical connection may be made by either plugging the provided
electrical cord into an appropriately wired electrical socket, or by wiring
the machine directly into an electrical disconnect box.
WARNING:
If the electrical cord, plug or wiring should become
frayed or damaged, replace it at once. Do not attempt
to operate the machine with faulty wiring as it could
result in severe injury or death.
NOTE:
Refer to the machinery identification plate to determine
the electrical specifications of this machine in respect
to voltage, phase and amperage requirements.
WARNING:
Do not start Sander before checking for proper sanding
belt tracking.