Landis P-220, Руководство оператора

Страница: 5 / 13

5
START-UP
WARNING:
Eye protection should always be worn by the operator
and others in the work area when setting up the
machine. Eye protection is required for protection from
flying debris and dust, which could cause eye injury.
Before shipment, your Landis Sander was checked at the factory for
proper adjustment and operation. However, due to the possibility of
jarring or damage during handling and shipping, it is necessary to check
that the machine is in proper working order before use.
WARNING:
Before initial start up, turn sanding shaft by hand to
ensure that all parts are free.
BEFORE CONNECTION TO AN ELECTRICAL POWER SUPPLY:
1.
Check that the switch is off.
2.
Rotate the sanding shaft to see that all parts are free and not
binding. You can tell that one complete revolution has been made
when the joint of the sanding belt has gone by the sanding wheels
twice.
3.
If applicable, rotate the Naumkeag by hand to see that the
sanding pad is not damaged and the shaft not bent. Optional
accessory.
WARNING:
As with any piece of electrical equipment, there is an
ever present hazard of electrical shock when operating
or touching the Sander. Ensure the machine is properly
grounded at all times.
Do not force the equipment. It will do the job better and
safer at the rate for which it was designed.