Landis P-220, Руководство оператора

Страница: 7 / 13

7
DAILY AND WEEKLY MAINTENANCE
1.
Clean your Landis Sander daily.
2.
Shake dust bag daily. Empty it weekly.
After cleaning the machine, turn dust extraction motor off. While
the motor is coasting to a stop, shake bag vigorously.
The cleaner you keep the dust bag, the less likely you are to burn a
hole in it. Failure to shake the dust bag and empty it will only
increase this likelihood, but also cause a significant loss of
dust extraction from the sanding, trimming and brushing
areas.
For better suction, gates have been installed
behind hoods. By opening and closing the
appropriate gates, suction can be controlled.
WARNING: Dust from Sander is combustible. Do not smoke while
cleaning the machine and dust collector.
Damaged dust bag will allow the escape of
combustible materials causing a fire hazard around the
machine.
Check damaged parts. Before further use of a tool,
guard or other part that is damaged, check carefully to
determine that it will operate properly and perform its
intended function. Check for mounting or any other
condition that may affect its operation. A tool, guard or
other part that is harmfully damaged should be properly
repaired or replaced.
If the electrical cord, plug or wiring should become
frayed or damaged, replace it at once.
Do not operate machine without hoods properly
installed.