Landis P-220, Руководство оператора

Страница: 10 / 13

10
4. Disconnect the electrical wires and the connector on the motor
box.
5.
Remove the eight (8) nuts and washers holding the fan housing to
the machine.
6.
Remove entire assembly of fan housing and motor plate from the
machine.
7.
Remove the top cover by loosen the ten (10) screws on top of the
motor shaft.
8.
Loosen the bolt on top of the motor shaft.
9.
Pull the blower wheel off.
10.
Remove the four (4) screws that hold the motor to the fan housing.
11.
Reassemble with new motor in reverse order of above.
12.
Reconnect the power supply.
13.
Turn the blower motor on and place your hand near a dust
extraction port to see whether the blower is not running backwards.
If you do not already know how to fix this without referring to this
manual, call a qualified electrician.
WARNING: Be absolutely certain to reconnect the electrical wire to
the proper terminals.
Failure to do so can result in improper motor rotation, a
ruined motor, fire, or injury to yourself.