Chapter 6 - Performing System Upgrades
Gyr
70
98-1031 Rev AA
Concentrator User and Installation Guide
G.
Type
bye
.
Figure 6 - 23. C:\bye
6.
Boot to Diagnostics Mode by typing
y
for yes in the Hyperterminal window.
7.
When the command prompt displays a message to say the transfer is complete, type
bye
to reset
the board.
8.
Return to Hyperterminal. Type
y
for Yes to return to the Diagnostics menu.
9.
Confirm the subnet mask address.
Figure 6 - 24. Ramlog read successful message
After a few seconds, Hyperterminal displays messages to confirm a successful
restart. When you see the message “Ramlog Read Successful,” you can
continue with the programming process.
Return to Diagnostics quickly, or Hyperterminal tries to obtain another new IP
address.
