Gyr
Chapter 3 - Field Configuration
Series IV Concentrator U and I Guide
98-1031 Rev AA
21
19.
Type
q
for quit.
Figure 3 - 10. Type q for quit
20.
Type
y
for yes.
Figure 3 - 11. Rebooting the concentrator via Hyperterminal
21.
After the concentrator resets, close Hyperterminal.
22.
Unplug the cable marked “Console” from COM 1.
23.
Plug the Lan Protocol cable into COM 1.
Do not disconnect the power cables before the programming cable, the unit
uses battery backup. This runs down the battery and can affect routing.
