Gyr
Chapter 4 - Concentrator Installation
Series IV Concentrator U and I Guide
98-1031 Rev AA
41
8.
Attach the right-angle end of the cable to the top of the LAN antennas.
Figure 4 - 11. Attaching right-angle end of cable
9.
With the mounting kit, affix the concentrator and two brackets sandwiched on the pole down
from the light arm using the supplied hardware.
Figure 4 - 12. Concentrator mounted
10.
Attach the AC power cable to the concentrator using one of the power cable options. Leave slack
in the cable to form a drip loop.
If using the 105704-000, 105704-001, 105704-002, or 105704-003 cables, the
end of the cable opposite the connector (the unterminated end) must be
installed in a junction box or other suitable enclosure.
Leaving the end of the cable exposed may allow water to migrate into the
cable and into the Concentrator.
See
for power cable installation procedures and details.
