Landis+Gyr E470 Series Скачать руководство пользователя страница 6

Страница: 6 / 69

Page 6 of 69

Issue: 1.8

Introduction

E470 Tokenless Smart Prepayment Meter

Introduction

1.1 Scope

This user manual applies to the British Standard 5236J-Y SMS messaging

Tokenless prepayment meter.

1.2 Purpose

This manual contains all information required for the application of the

meters for the intended purpose. This includes:



Characteristics, construction and functionality of the meters.



Information about possible dangers, their consequences and

measures on how to prevent them.



A detailed description of the tasks to be performed during the

entire life-cycle of the meters (configuration, installation,

commissioning, operation, maintenance, and disposal).

1.3 Target Group

The contents of this user manual are intended for technically qualified per-

sonnel of energy supply companies responsible for system planning,

installation and commissioning, operation, maintenance, decommissioning

and disposal of the meters.

1.4 Intended Use and Installation

The 5236 meters record active energy consumption in single phase two

wire networks. For this purpose they are directly installed in the supply line

by the energy supply company and are read regularly for energy charging

purposes. They are used according to the technical specifications stated in

the respective data sheets and below.

The meter is intended for installation in a residential environment by

qualified personnel. The meter conforms to British Standard in its

mechanical specification and is suited to installation in any situation that

also meets this standard. The meter must be installed away from powerful

sources of electromagnetic interference.

There are no user serviceable parts within the meter and the meter must be

returned to the manufacturer or an authorized partner for repair and/or

maintenance. There are no permissible adjustments to meter installation

procedure or meter operation outside those covered by the detailed

operational instructions contained within this document.

If the equipment is used in a manner not specified by the manufacturer the

protection provided by the equipment may be impaired.

Содержание E470 Series






































































Результаты поиска

Содержание E470 Series

Отзывы:

Бренды по названию

Популярные бренды

Landis+Gyr E470 Series, Руководство пользователя

Результаты поиска

Содержание E470 Series

Отзывы:

Бренды по названию

Популярные бренды