REVERSE
The
REVERSE
button allows user to switch treadbelt direction from forward to reverse and vice versa. The
Rehabilitation Treadmill will run in reverse when
REVERSE
button is pressed and red reverse light is illuminated.
REMOTE START/STOP SWITCH
The remote
START/STOP
switch functions exactly as the
PAUSE
button on the Control Panel. Press the remote
START/STOP
switch to place the treadmill in pause mode. All statistical information will be preserved. Press the
START/STOP
switch again to resume at previous speed or 1.0 mph, whichever is lower. Normal treadmill operation
can also be resumed by pressing either the
START
or the
PAUSE
button from the Control Panel.
Always hold remote start/stop switch when treadmill is being operated in the reverse mode.
ACCUTRACK CONTACT HEART RATE MONITORING SYSTEM™
The AccuTrack™ contact heart rate cross-bar automatically detects pulse when user holds onto the metal contacts. To view your
heart rate, press
DISPLAY
until Pulse is selected. Then grasp the metal pulse contacts and wait 4-8 seconds for your heart rate to
be displayed.
The AccuTrack™ system is designed to be used at walking speeds. A natural running motion involves using your arms to maintain
balance. Since contact heart rate systems require your arms to remain stationary, we recommend using the system only at speeds of
less than approximately 4 mph (6.4 km/h) or the fastest speed at which you are comfortable walking.
4
Features
MANUAL CONTROL
The Rehabilitation Treadmill combines a straightforward control panel design with a variety of features and options.
METRIC MODE
The Rehabilitation Treadmill comes standard displaying English units and can be changed to display metric units by pressing
SPEED “-”, GRADE “-”, and “START” simultaneously while treadmill is off. Then press
STOP
. Repeat same steps to return back to
English units.
AUTOMATIC SCAN
Automatic Scan Mode allows you to view each of the six displays continuously. To enter Automatic Scan Mode, depress the
DISPLAY
button until the display advances by itself. In Automatic Scan Mode, the display advances every 5 seconds. Press the
DISPLAY
button again to exit Automatic Scan Mode.
VARIABLE ELEVATION OVER-SPEED PROTECTION™
To prevent treadbelt over-speed at speeds below 0.5 mph, Landice has developed a Variable Elevation Over-speed Protection™
system. It automatically adjusts elevation based on treadbelt speed. See table below for VEOP™ parameters:
Speed (mph)
Speed (kph)
Max Elevation (% grade)
0.0 mph or Pause Mode
0.0 kph or Pause Mode
5%
0.1 – 0.4 mph
0.2 – 0.7 kph
10%
0.5 – 12.0 mph
0.8 – 19 kph
15%
Optional Features:
Landice_RTM_Manual_8.2011.qxd:Landice CT Manual-2/05 10/11/11 10:04 AM Page 10
