Appendix A: Medrail Installation
STEP 1
STEP 2
STEP 3
STEP 4
Insert the side rail into the upper
rail clamp and tighten the bolt
using a 1/2” socket.
(Do not over-tighten.)
Fit the side rail to the bottom
rail clamp.
Use a 3/16” allen wrench to tighten
the rail clamp bolts.
(Return to Step 9 in Assembly
Instructions).
Use a soft mallet to firmly set the
rails inside the clamp.
SPEAKERS:
To use the speakers, connect to one of 2 available inputs: 3.5 mm head phone plug (compatible with any audio source with a standard
headphone jack) and the iPod® docking connector. Speakers only operate when the treadmill is ON. Once you connect your personal
player, you’ll be able to turn on/off and adjust the different levels by pressing the “+/-” keys to the right of the fan vent.
FAN:
Fan will only operate when the unit is ON. You’ll be able to turn on/off and adjust the different levels by pressing the “+/-” keys to the left
of the fan vent.
Note: The accessories keypad has a small power LED (light) on the bottom left corner. This is a diagnostic light which will remain lit as an
indicator that the accessories are being adequately powered.
Landice_RTM_Manual_8.2011.qxd:Landice CT Manual-2/05 10/11/11 10:04 AM Page 16
