![background image](http://html1.mh-extra.com/html/landice/elliptimill-e8/elliptimill-e8_service-manual_3501682051.webp)
PAGE 51
Tools Required:
10mm Allen Wrench
6mm Allen Wrench
2.5mm Allen Wrench
10mm Socket & Socket Wrench
Phillips Head Screw Driver
Rubber Mallet
Instructions:
1.
Remove the crankshaft covers on both sides by removing the two Phillips head
screws located on the covers.
2.
Using a
6mm
Allen wrench, remove the eight screws that hold both of the crank
arms in place on the crankshaft.
3.
Using a
10mm
Allen and socket wrench, remove the two main crankshaft bolts
located on either side of the crankshaft and remove.
4.
Using a
2.5mm
Allen wrench, loosen the two setscrews that hold the retaining
collar in place. Using your rubber mallet
gently
tap off and remove the retaining
collar from the crankshaft.
5.
Slide out and remove the crank bearing and the plastic collar from the crankshaft.
6.
Using your rubber mallet,
gently
tap the rubber rollers downward to remove them
from the crank arm.
7.
Using the
2.5mm
Allen wrench, loosen the two setscrews that hold the last
retaining collar on the crankshaft. Using your rubber mallet
gently
tap off and
remove the retaining collar from the crankshaft.
REVERSE PROCESS 7 THRU 1 TO INSTALL THE NEW CRANKSHAFT.
CRANKSHAFT REMOVAL & REPLACEMENT
INSTRUCTIONS
Содержание ELLIPTIMILL E8
