![background image](http://html1.mh-extra.com/html/landice/elliptimill-e8/elliptimill-e8_service-manual_3501682038.webp)
PAGE 38
Drive Wheel Assembly
Attaches to the arm pinion and crank assembly. The assembly will run concurrently with
the crank shaft. This assembly is on the opposite side of the drive belt.
Faceplate
This overlay is found on the Pro Trainers models and is screwed onto the Upper Display
Board.
Footpad
Cushion for user’s feet.
Harness, Main upper
Transmit data from the upper board to the relay board.
HRC Dual Receiver
Takes transmission signals from the chest strap or CHR crossbar and converts it to a
digital signal to display heart rate info on your upper console.
Leveling Foot
The ElliptiMill will have 6 leveling feet to level the equipment and prevent it from
rocking.
Linkage Cap Assembly
These covers are placed over the adjustment knob to protect the parts that adjust the
stride length.
Lower Bracket Cover Assembly
The caps cover where the pedal tube and stride are bolted.
Magnetic Brake Wheel
The brake wheel provides mechanical resistance for user’s performance. The brake
wheel uses magnetic force to provide mechanical resistance for level of performance.
Moving Handlebar Assembly
Attaches to the stride arm which allows your arms to move with your stride.
Pedal Tube
This bolts to the end of the stride arm and rides on the pedal roller. This part takes the
force from the customers stride and in turn moves the crank arm & shaft to create an
elliptical motion.
Содержание ELLIPTIMILL E8
