![background image](http://html1.mh-extra.com/html/landice/elliptimill-e8/elliptimill-e8_service-manual_3501682013.webp)
PAGE 13
200 – 250 VOLT ELLIPTIMILLS
Ellipticals marked 200 – 250 VAC are intended for use on a circuit having a nominal
rating more than 120V and are factory-equipped with a specific cord and plug to permit
connection to a proper electric circuit. Make sure the product is connected to an outlet
having the same configuration as the plug. No adapter should be used with this product.
If the product must be reconnected for use on a different type of electric circuit, qualified
service personnel should make the reconnection.
DANGER: Improper connection of the equipment-grounding connector can result
in a risk of electric shock. Check with a qualified electrician or serviceman if you
are in doubt as to whether the product is properly grounded. Do not modify the
plug provided with the product. If it will not fit in the outlet, have a proper outlet
installed by a qualified electrician.
Содержание ELLIPTIMILL E8
