Landa VHP Series, Руководство оператора

Страница: 16 / 50

16
Operations
STEP 7: Open valve on LP tank,
then slightly depress main gas
valve control knob on the right side
of the machine and turn it counter-
clockwise to the Pilot position.
NOTE: Knob cannot be turned
from “Pilot” to “OFF” unless the
knob is slightly depressed.
STEP 9: Turn switch to pump
position and pull the trigger on the
spray gun. Turn variable pressure
control wand handle clockwise to
obtain pressure for cold water oper-
ation.
For hot water, turn the switch to the
burner position and pull the trigger
on the spray gun.To apply deter-
gent, read section on Detergents
and General Cleaning Techniques
Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T
Control
Knob
Gas
Valve
Red
Ignitor
Pump and Burner
Switch
STEP 8: Depress the control knob all the way and hold it in. After five (5)
seconds, depress the red igniter until you hear a loud click. Repeat 3 or 4
times if necessary until pilot is lit. If pilot does not remain lit, repeat
operation allowing a longer period of time before releasing the gas valve
knob. After the pilot lights, continue to hold the control knob down for about
one (1) minute before releasing. Look at the pilot viewing mirror at the rear
of the machine.
Turn gas control knob counterclockwise to “ON.”