42
Instalacion
Instalacion
Colocar la máquina en una ubicación conveniente, con
amplio apoyo, drenaje y espacio para servicio de
mantenimiento.
Este equipo es para uso en interior.
Ubicación:
La ubicación deberá proteger la máquina de las condi-
ciones perjudiciales del medio ambiente, tales como
viento, lluvia y congelamiento.
1.
La máquina deberá funcionar en una superficie
nivelada donde no sufra la influencia de factores
externos tales como vientos fuertes, temperaturas
de congelamiento, lluvia, etc. Al seleccionar la
ubicación, considerar accesibilidad para
reemplazar Tanques de propano líquido, reabas-
tecer detergentes, reajustes y mantenimiento. El
operador deberá tomar precauciones para prevenir
los excesos de humedad que puedan afectar los
componentes eléctricos.
2.
Es recomendable hacer una partición entre el área
de lavado y la máquina para prevenir el rociado
directo de la pistola cuando está en contacto con la
máquina. La humedad excesiva en los controles
eléctricos reducirá la vida útil de la unidad y podría
causar cortocircuitos.
3.
Durante el montaje, evitar áreas con ventilación
insuficiente o áreas donde los ventiladores
generen insuficiente suministro de oxígeno. Se
puede obtener una buena combustión, solamente
cuando hay suficiente suministro de oxígeno
disponible para la cantidad de combustible incin-
erado. Si se instala en una área con ventilación
insuficiente, suministrar aire fresco exterior al
quemador con un ventilador instalado dentro del
ambiente. Evitar espacios estrechos o áreas cerca
de ventiladores.
Regulaciones Sobre Gases:
Consultar con la compañía de gas local y con las auto-
ridades municipales respecto a las normas o regula-
ciones específicas que rijan el montaje. El montaje
debe hacerse de acuerdo con las regulaciones munici-
pales locales.
Aspecto Eléctrico:
Esta máquina, al ser instalada, debe ser puesta a tierra
según las regulaciones municipales locales. Verificar el
adecuado suministro de energía usando un voltímetro.
El voltímetro VHP2-15021D requiere un receptáculo de
20 amp para cumplir con los estándares de certifi-
cación UL 1776.
Respiradero:
Cuando la lavadora a presión es instalada en un
espacio muy estrecho sin aberturas de ventilación al
exterior, deben tomarse medidas para suministrar aire
de combustión a través de aberturas especiales, una
cerca del piso y otra cerca del techo; cada una medida
en base a una pulgada cuadrada o más de área libre
por cada 1,000 BTU de consumo por hora.
Colocación:
No colocar la máquina cerca de materiales combusti-
bles. Mantener todo material inflamable a 20 pies de
distancia por lo menos.
Permitir suficiente espacio para dar servicio de
mantenimiento a la unidad.
Regulaciones municipales locales requieren mantener
ciertas distancias entre el piso y las paredes.
(Dos pies de distancia deberían ser suficientes.)
Suministro de Agua:
El suministro de agua para la unidad deberá ser
provisto por una manguera de jardin de 5/8” de
diámetro interno con una presión de agua local no
menor a 30 psi. Si el suministro de agua es insuficiente,
o si la manguera está torcida, la unidad funcionará mal
y el quemador no arrancará.
Conexión:
Conectar la varilla, boquilla y pistola (como corre-
sponda). En las conexiones de tubería de rosca, usar
cinta de teflón para evitar fugas de agua. (Ver Identifi-
cación del Componente.)
Conectar la manguera de alta presión al niple de
descarga jalando el collar de acoplamiento hacia atrás
e insertándolo en el niple de descarga. Luego, empujar
el collar hacia adelante para asegurarlo. Un inyector
detergente podría ser insertado entre el acoplamiento
de la manguera y el niple de descarga.
Colocar el tubo de productos detergentes en el jabón
líquido o solución detergente. Evitar que el tubo
succione aire.
PRECAUCION: Al instalar la manguera de
gas propano al Tanque de propano
Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T
Содержание VHP Series
Страница 2: ...2 Landa VHP 2 1500 3 2000 Operator s Manual 8 913 949 0 T Machine Data Label...
Страница 38: ...38 Injector Assembly 2 4 011182 Landa VHP 2 1500 3 2000 Operator s Manual 8 913 949 0 T 1 2 3 4 3 1100 3 2000...
Страница 49: ...49 Nota Landa VHP 2 1500 3 2000 Operator s Manual 8 913 949 0 T...
Страница 50: ...8 913 949 0 Printed in U S A...