Land Pride RC3615, Руководство оператора

Страница: 50 / 54

48
Section 7: Features & Benefits
RC3615 (540 RPM) and RCM3615 (1000 RPM) Rotary Cutters 330-502M 4/20/15
Table of Contents
Section 7: Features & Benefits
RC3615 and RCM3615 Models
Features Benefits
Surpassed rugged
industry standards All Land Pride
Rotary Cutters
have been designed and tested and meet rigorous
voluntary testing procedures.
Factory assembled Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
5 Year gearbox warranty Shows confidence in gearbox integrity.
160 HP Divider gearbox
and 110 HP wing gearboxes A rugged heavy built gearboxes capable of handling heavy cutting applications.
Gearbox seal protection Gearbox bottom seal protection for longer bearing life.
Smooth Top Design Allows for easy cleaning of deck.
Low tongue weight Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
Narrow tongue construction Allows for a tighter turning radius.
Input driveline:
Cat. 6 CV or Cat. 5 Conventional Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Cat. 5 intermediate & Cat. 4 wing
drivelines with slip-clutches Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load
instead of twisting the driveline.
Slip-clutch drivelines Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.
High Blade tip speed
15,000 FPM Wing RC3615
15,268 FPM Center RC3615
14,620 FPM Wing RCM3615
15,578 FPM Center RCM3615 Allows clean cutting of material.
6" Blade overlap Eliminates skipping during turns.
Left wing rotates clockwise Better discharge of material. Picks up tractor tracks.
3/16" Round stump jumper Standard thick stump jumper material keeps damage to a minimum.
1/4" Sidewall thickness Increased thickness reduces damage from objects being thrown into deck sidewalls.
Self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.
Hinged wing sections Allows
cutter
to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
1" Solid hinge rods Larger diameter hinge rod gives greater strength to the
cutter
from front to rear, and in
the hinge area itself.
Wing transport locks Wing transport locks securely hold the wings in the folded position in case of hydraulic
failure.
Enclosed front to rear dual
leveling rods Dual leveling rods enable the
cutter
to pull equally on the rear axle during travel over
rough terrain.
5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Spring cushioned center-axle Protects unit from bumps and ground shock.
Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing entire axle
assembly.
Wheel options Laminated tires: Eliminates flats.
Airplane tires without foam filling: Give better cushion while transporting.
Airplane tires with foam filling: Give better cushion while transporting and can’t go
flat.
Double swivel hitch option Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.