background image

1

Important Safety Information

2/26/16

LR3784 & LR3796 Landscape Rakes   302-337M

Table of Contents

Important Safety Information

These are common practices that may or may not be applicable to the products described in 
this manual.

Safety at All Times

Thoroughly read and understand 
the instructions given in this 
manual before operation. Refer to 
the “Safety Label” section, read all 
instructions noted on them.

Do not allow anyone to operate 
this equipment who has not fully 
read and comprehended this 
manual and who has not been 
properly trained in the safe 
operation of the equipment.

The operator must not use drugs 
or alcohol as they can change the 
alertness or coordination of that 
person while operating equipment. 
The operator should, if taking over-
the-counter drugs, seek medical 
advice on whether he/she can 
safely operate the equipment.

Operator should be familiar with all 
functions of the tractor and 
attachments, and be able to 
handle emergencies quickly.

Make sure all guards and shields 
are in place and secured before 
operating implement.

Keep all bystanders away from 
equipment and work area. 

Operator must start tractor and 
operate controls from the driver’s 
seat only. Never from the ground.

Do not leave tractor or implement 
unattended with engine running.

Dismounting from a moving tractor 
can cause serious injury or death.

Do not allow anyone to stand 
between tractor and implement 
while backing up to implement.

Keep hands, feet, and clothing 
away from power-driven parts.

Watch out for fences, trees, rocks, 
wires, etc., while operating and 
transporting implement.

Turning tractor too tight may cause 
hitched machinery to ride up on 
wheels. This could result in injury 
or equipment damage.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a 
potential hazard to personal safety involved and extra 
safety precaution must be taken. When you see this 
symbol, be alert and carefully read the message that 
follows it. In addition to design and configuration of 
equipment, hazard control, and accident prevention are 
dependent upon the awareness, concern, prudence, and 
proper training of personnel involved in the operation, 
transport, maintenance, and storage of equipment.

!

Be Aware of 
Signal Words

A Signal word designates a degree or 
level of hazard seriousness. The 
signal words are:

Indicates an imminently hazardous 
situation which, if not avoided, will 
result in death or serious injury. This 
signal word is limited to the most 
extreme situations, typically for 
machine components that, for 
functional purposes, cannot be 
guarded.

!

DANGER

Indicates a potentially hazardous 
situation which, if not avoided, could 
result in death or serious injury, and 
includes hazards that are exposed 
when guards are removed. It may also 
be used to alert against unsafe 
practices.

Indicates a potentially hazardous 
situation which, if not avoided, may 
result in minor or moderate injury. It 
may also be used to alert against 
unsafe practices.

!

WARNING

!

CAUTION

Parts Manual QR Locator

The QR (Quick Reference) code on the 
cover and to the left will take you to the 
Parts Manual for this equipment. 
Download the appropriate App on your 
smart phone, open the App, point your 
phone on the QR code and take a picture.

Dealer QR Locator

The QR code on the left will 
link you to available dealers 
for Land Pride products. 
Refer to Parts Manual QR 
Locator on this page for 
detailed instructions.

For Your Protection

Thoroughly read and understand 
the “Safety Label” section, read 
all instructions noted on them.

Tractor Shutdown & Storage

If engaged, disengage PTO.

Lower attached implement to 
ground, put tractor in park or set 
park brake, turn off engine, and 
remove switch key to prevent 
unauthorized starting.

Wait for all components to come to 
a complete stop before leaving the 
operator’s seat.

Detach and store implement in an 
area where children normally do 
not play. Secure implement using 
blocks and supports.

OFF

REMOVE

Содержание LR3784































Отзывы: