background image

21

Section 6: Accessories

2/26/16

LR3784 & LR3796 Landscape Rakes   302-337M

Table of Contents

Dual Gauge Wheel

NOTE:  Arm of Dual Gauge Wheel provides a mount to support Flip Down Grader Blade Accessory.

Kit Bundles

302-174A . . . . . . . . .  DUAL GAUGE WHEELS-WIDE TIRE 13" x 6.5" x 6"
302-176A . . . . . . . . .  DUAL GAUGE WHEELS-NARROW TIRE 13" x 4" x 6"

Grader Blade Mounting Arm

NOTE:  Includes two Grader Blade Mounting Arms to support Flip Down Grader Blade Accessory when Dual 

Gauge Wheel Accessory is not installed.

302-260A . . . . . . . . .  GRADER BLADE MOUNT LESS DUAL GAUGE WHEEL

Flip-Down Grader Blade With End Plates

NOTE:  Flip-Down Grader Blade Assembly is complete with end plates. Grader Blade Mounting Arms must 

be purchased separately if Dual Gauge Wheels are not mounted on the Landscape Rake.

Kit Bundles

302-106A . . . . . . . . .  7' GRADER BLADE
302-107A . . . . . . . . .  8' GRADER BLADE

Rear Blade Attachments

NOTE:  

The 

Landscape Rake

 can be converted to a Rear Blade by removing the R

ake 

Assembly from its Main Frame 

and attaching a “Rear Blade Attachment” to the Main Frame.

Any of the Rear Blade Kit Bundles below will fit the Main Frame of all LR37 Series Landscape Rakes.

301-399S  . . . . . . . . .  72" REAR BLADE ATTACHMENT
301-400S  . . . . . . . . .  84" REAR BLADE ATTACHMENT
301-401S  . . . . . . . . .  96" REAR BLADE ATTACHMENT

Hydraulic Angling

NOTE:  The Hydraulic Angling Kit allows operator to change rake angle from the tractor seat.

Kit Bundle

302-335A . . . . . . . . .  KIT, LR37 HYDRAULIC ANGLE

Section 6: Accessories

Содержание LR3784































Отзывы: