manualshive.com logo in svg

Land Pride 3P500, Оригинальное руководство пользователя

Поделиться
Скачать
Land Pride 3P500 Скачать руководство пользователя страница 6

Important Safety Information

Table of Contents

2

3P500, 3P500V, & 3P600

313-517M

2018-06-12

Wear Protective Equipment

Wear protective clothing and equipment.

Wear clothing and equipment appropriate for the job.
Avoid loose-fitting clothing.

Because prolonged exposure to loud noise can cause
hearing impairment or hearing loss, wear suitable
hearing protection such as earmuffs or earplugs.

Because operating equipment safely requires your full
attention, avoid wearing entertainment headphones while
operating machinery.

Handle Chemicals Properly

Agricultural chemicals can be dangerous. Improper use 
can seriously injure persons, animals, plants, soil and 
property. 

Do not use liquid seed treatments with the drill.

Read and follow chemical manufacturer’s instructions.

Wear protective clothing.

Handle all chemicals with care. 

Avoid inhaling smoke from any type of chemical fire.

Never drain, rinse or wash dispensers within 100 feet
(30 m) of a freshwater source, nor at a car wash.

Store or dispose of unused chemicals as specified by
chemical manufacturer.

Dispose of empty chemical containers properly. Laws
generally require power rinsing or rinsing three times,
followed by perforation of the container to prevent re-use.

Use an Adequate Tractor

Ensure that the tractor is rated for, and correctly ballasted
for the drill’s 3-point loading. Check that drill plus ballast
does not exceed the tractor’s capability.

Avoid transport with material loaded in boxes.

Keep Riders Off Machinery

Riders obstruct the operator’s view. Riders could be 
struck by foreign objects or thrown from the machine.

Never allow children to operate equipment.

Keep all bystanders away from machine during operation.

Use Safety Lights and Devices

Slow-moving tractors and towed implements can create 
a hazard when driven on public roads. They are difficult 
to see, especially at night.

Use flashing warning lights and turn signals whenever
driving on public roads. 

Use lights and devices if provided with implement.

Содержание 3P500





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды