Land Pride 3P500 Скачать руководство пользователя страница 17

Страница: 17 / 52

2018-06-12

3P500, 3P500V, & 3P600



313-517M

Operation Instructions

This section covers general operating procedures.
Experience, machine familiarity and the following
information will lead to efficient operation and good
working habits. Always operate farm machinery with
safety in mind.

Pre-Start Checklist

Carefully read “Important Safety Information”
starting on page 1.

Lubricate drill per “Lubrication and Scheduled
Maintenance” starting on page 32.

Check all tires for proper inflation. See “Tire
Pressures” on page 39.

Check all bolts, pins and fasteners. See “Torque
Values Chart” on page 39.

Check drill for worn or damaged parts. Repair or
replace faulty parts before going to the field.

Rotate both drive wheel to verify that the drive and
meters are working properly and free from foreign
material.

Falling Hazard:
Watch your step when walking on drill steps and walkboard.
Falling from drill could cause severe injury or death.

WARNING:

Cancer and Reproductive Harm - www.P65Warnings.ca.gov

To prevent injury or death:

Read and understand Operator’s Manual before using.
Lower implement, stop tractor engine, set park brake and remove ignition

Do now allow riders.
Keep others away during operation.
Safely support and secure implement before repairs are made.

key before servicing, adjusting, repairing or unplugging.

CAUTION

818-719C

WARNING

To avoid serious injury or death:

Watch your step when climbing ladder or
walking on walkboard.

838-102C

Содержание 3P500





















































Результаты поиска

Содержание 3P500

Отзывы:

Бренды по названию

Популярные бренды

Land Pride 3P500, Оригинальное руководство пользователя

Результаты поиска

Содержание 3P500

Отзывы:

Бренды по названию

Популярные бренды