lancer FLAVOR SELECT 22, Инструкция по установке и обслуживанию

Страница: 22 / 40

H. Rinse the lower chute thoroughly.
I. Dry the lower chute thoroughly.
J. Empty the cleaning solution from the spray bottle, then refill with plain water.
Rinse the upper chute thoroughly.
K. Dry the upper chute.
L. Reinstall the lower ice chute onto the upper chute, then reinstall the spring.
M. Reinstall merchandiser.
N. Reconnect power to the dispenser.
3. HOW TO OPERATE AND ADJUST THE DISPENSER
3.1 NORMAL OPERATION
A. Fill cup with desired amount of ice.
B. Place cup under nozzle below desired brand.
C. Select up to two desired bonus flavors from those available on the keypad, by
pressing against the flavor label once. Selection indicator light will illuminate,
acknowledging selection.
D. Press and hold brand label to fill cup.
E. Top off cup as desired.
3.2 PROGRAMMING AND SETUP SOFTWARE
The Lancer FS22 has been factory preset to the settings necessary to comply with
the brand/flavor version of the unit requested by the customer.
Adjustments or upgrades should only be performed by trained personnel. For any
upgrades, an upgrade kit may be purchased. The kit includes all of the hardware
required for the upgrade, including bezels and valves.
CONTINUED ON NEXT PAGE
Lancer reserves the right to make changes and updates as required. If
you have any questions regarding the latest versions of programs, please
contact your Lancer representative.
22
P.N. 28-0580/02