3
Bevariety
TM
ACIB Dispenser Numbering Convention Bevariety
TM
ACIB Dispenser Kit Part Numbers
22” Dispenser:
85-204AA-B-C-XYZ
30” Dispenser:
85-218AA-B-C-XYZ
44” Dispenser:
85-208AA-B-C-XYZ
AA = Number of flavors
B = Merchandiser graphics designation
C = MVU option: 0 - no MVU, 2 - MVU
X = Valve flow rate
Y = Valve Type
Z = Splash Plate Type
82-4004 - 4” Heavy Duty Adjustable Leg Kit (4 Legs)
82-4054 - 22” Drip Tray Kit
82-4055 - 44” Drip Tray Kit
82-4046 - 30” Drip Tray Kit
82-4007 - 44” Joining Kit, Hardee’s
82-3962 - 44” Joining Kit, Carl’s Jr
Unit Overview
The Bevariety™ ice combo is a multi-brand, flavor shot capable
beverage dispenser. It has a carbonator tank integrated into the
cold plate so it provides true, cold carbonated, sparkling
beverages.
Above Counter Ice Combo:
• Available in 22”, 30”, and 44” wide models.
• 22” Six Valve: Valves 1 and 6 are carb water only, Valves 2-5
are non-carb water or carb water capable.
• 30” Eight Valve: Valves 1, 2, 7, and 8 are carb water only,
Valves 3-6 are non-carb water or carb water capable.
• 44” model is two 22” units joined by a kit with optional
Multi-Flavor Valve Unit (MVU).
Features of Optional Multi-Flavor Valve Unit
• Capable of serving up to three additional brands on each
side of the ice dispenser through the MVU valve.
• Can dispense up to three chilled products (30” only) or two
chilled and one ambient product on each MVU pad.
• Capable of dispensing flavor shots.
• Replaces the two center LEVs.
• Provides additional carb or non-carb beverage flexibility via a
carb/non-carb convertor located behind the backblock of the
four center valve positions.
Valves 3 or 6 on a 30 inch ACIB (valves 2 or 5 on 22 inch
ACIB) can be set to pour either carbonated or non-
carbonated beverages by pulling out the converter,
rotating 180°, and reinserting it into the dispenser.
The 30” ACIB has two more LEV’s in addition to more
cooling capacity and a larger ice bin.
NOTE
NOTE
You must shut down both still and sparkling water
supplies as well as the CO
2
line and syrup supply to
change out the switchable backblock.
NOTE
To change from plain to soda:
1. Shut off water, syrup, and CO
2
.
2. Gas-out the dispenser.
3. Remove valve and backblock.
4. Pry converter out with a small flathead screwdriver.
5. Reinstall converter in correct position.
Features of Plain/Soda Water Converter
Your Service Agent:
Service Agent Telephone Number:
Serial Number:
Model Numer:
This manual was developed by the Lancer Corporation as a reference for the owner/operator and installer of this
dispenser. Please read this guide before installation and operation of this dispenser. If service is required please call your
Lancer Service Agent or Lancer Customer Service. Always have your model and serial number available when you call.
READ THIS MANUAL
