8
CONTINUED ON NEXT PAGE
Lancer PN: 28-1005/01
MAKE SURE THE MERCHANDISER ASSEMBLY IS
SECURELY INSTALLED TO THE FRAME ASSEMBLY
USING THE CONNECTION TABS. MAKE SURE THERE
ARE NO INTERFERENCES WITH ANY ICEMAKER
INSTALLED.
!
ATTENTION
If the merchandiser assembly ever gets scratched or
scuffed, there is a paint marker (PN: 66-2000) available
to touch up any marks or scratches. Contact Lancer
Customer Service for more information on the mer-
chandiser paint marker.
NOTE
12. Line up the top of the Merchandiser Assembly over the
top of the Top Cover Assembly.
13. Firmly push the Merchandiser Assembly onto the
Frame Assembly to engage the connection tabs and
secure to the unit.
Do not glue printed vinyl directly to the surface of the
Merchandiser Assembly, this could change the light
distribution and make the center of the panels looks
darker than other areas.
!
ATTENTION
11. Slide the merchandiser graphic into the Merchandiser
Assembly by inserting the graphic one side at a time.
14. Push on each badge from the front of the
merchandiser to test connection.
15. Once the merchandiser is securely installed to the unit,
plug in the dispenser to test operation.
