-5-
Assembly instructions: XL 8
8 m Telescopic Lance Series
1. Remove lance from carry case and
remove tubing from pocket.
Inspect for damage before each use. Do
not use damaged equipment!
Montageanleitung Teleskop-Lanze XL 8 D
Assembly instruction for telescopic lance XL 8 D
Instruction de montage pour lance télescopique XL 8 D
Istruzioni di montaggio per lancia telescopica XL 8 D
Birchmeier Sprühtechnik AG
•
Im Stetterfeld 1
•
5608 Stetten
www.birchmeier.com
max. 3 bar
< 3 m
5-10 sec
(19.07.13)
3. Remove the top section from the lance.
To prevent contamination ensure hoses are fitted properly by pulling on
each end before use and the dust plug is in place correctly after use.
To release dust plug / hose from the
push fit connector press down the
tab; whilst doing this pull the plug/
hose to remove from the connector.
To attach hose / plug to the push fit
connector simply push in to place.
For detailed videos on the
using push fit connectors see
www.lancelab.com.
Montageanleitung Teleskop-Lanze XL 8 D
Assembly instruction for telescopic lance XL 8 D
Instruction de montage pour lance télescopique XL 8 D
Istruzioni di montaggio per lancia telescopica XL 8 D
Birchmeier Sprühtechnik AG
•
Im Stetterfeld 1
•
5608 Stetten
www.birchmeier.com
max. 3 bar
< 3 m
5-10 sec
(19.07.13)
2. Remove end cap from the lance.
4. Remove the yellow plug from
the push fit connector. Store in
carry case pocket to be re fitted
after use, this prevents moisture
entering tubes when not in use,
reducing likely-hood of blockage.
