-8-
Assembly instructions: XL 8
8 m Telescopic Lance Series
Do not use during electrical storms or
during strong winds.
Montageanleitung Teleskop-Lanze XL 8 D
Assembly instruction for telescopic lance XL 8 D
Instruction de montage pour lance télescopique XL 8 D
Istruzioni di montaggio per lancia telescopica XL 8 D
Birchmeier Sprühtechnik AG
•
Im Stetterfeld 1
•
5608 Stetten
www.birchmeier.com
max. 3 bar
< 3 m
5-10 sec
(19.07.13)
To avoid electrocution do not use lance
near over head power cables.
Assembly of liquid nozzles: (Sold separately)
Flat fan liquid nozzle.
Cone spray liquid nozzle.
To prevent contamination ensure liquid nozzles are fitted properly by
pulling before use and the dust cap is in place correctly after use.
To release a liquid nozzle from the flexi-tip
remove the retainer clip and press the in
tab; whilst doing this pull the liquid nozzle
to remove from the connector.
To attach a liquid nozzle to the flexi-tip of
XL 8 (nozzle sold seperatly) simply push
in to place on the flexi-tip
.
For detailed videos on the using liquid
nozzles see www.lancelab.com.
Liquid nozzles are fitted using the same procedure as
the push fit connector of an XL 8 tubing kit.
* Do not use the same tubing kit, top section or flexi-tip for dusting and
spraying. Purchase additional tubing and flexi - tip kit.
