Lance Lab 8 m Telescopic Lance Series, Руководство по эксплуатации

Страница: 14 / 16

-14-
Troubleshooting: XL 8
8 m Telescopic Lance Series
Problems Possible causes Solutions
Dust remains in
tubing following
product
Bar pressure getting low at end
of treatment.
Keeping the pole in a vertical
position, press the trigger fully
whilst pulling the DR 5 pressure
release valve at the same time
to remove excess dust in the
XL 8 hose.
There is an issue with the
sprayer equipment.
DR 5 seals require
replacement. Refer to the
equipment manufacturers
instructions.
Possible XL 8 issues & solutions:
Reference Replacement Component Description Birchmeier Artikel-Nr.
1 XL 8 D Telescopic Lance 7 m (Dust-Version) 119 354 01
2 Heavy Duty Carry Case 119 361 01
3 Flexible tip 119 362 01
4 8 m Hose Kit 119 363 01
5 4 m Hose Kit 119 369 01
6 Tube Section 1 119 511 01
7 Tube Section 2 119 512 01
8 Tube Section 3 119 513 01
9 Tube Section 4 119 514 01
10 Tube Section 5 119 515 01
11 Tube Section 6 119 516 01
12 Tube Section 7 119 517 01
13 Safety Cap Set 119 518 01
14 Compression fitting 6mm 119 519 01
15 Safety Pin 119 521 01
16 Push fit liquid nozzle (Flat fan) (sold separately)
-
17 Push fit liquid nozzle (Cone) (sold separately)
-
18 Dust Blockage Tool (sold separately) 119 371 01
Spares & Replacement Components List: