4/8/16 Port USB/PS2 Rack Mountable KVM Switch User Manual
35
qualified service representative for repair.
The power cord or plug is damaged or worn
Liquid is spilled into the unit
The device is exposed to rain and water
The device has been dropped or the housing has been damaged
The function of the device is obviously changed
The machine can’t be operated normally as instructed by the operating instructions
Adjustment only for the control functions covered by the operating instructions, and other
inappropriate operations may cause damage, requiring more qualified personnel to perform
repairs.
Cabinet Installation
Before cabinet installation, make sure that the fixing device is securely fastened to the rack and
extended to the ground. The weight of the whole rack can be dispersed on the floor. Mount the
front and side securing devices in a single rack or the front;end fixtures in combination with
multiple racks before starting rack work.
Installfrom the bottom to up in the cabinet, and install the heaviest things first.
When extending the equipment from the rack, make sure that the rack is stable and stable.
Be careful when releasing the latch by pressing the device rails and sliding the unit into the rack.
The track of the slide rail may clip to your finger.
After mounting the device to the rack, carefully spread the rails to the locked position, and then
slide the unit into the rack.
Do not overload the AC supply branch circuit that supplies power to the rack. The total load
capacity of the rack should not exceed 80% of the branch circuit.
Make sure that all equipment used on the rack ; including electrical outlets and other power
connectors ; is properly grounded.
Make sure you have provided proper airflow for the equipment on the rack.
Make sure that the operating temperature of the rack environment does not exceed the
maximum operating temperature set by the manufacturer.
Do not stand on or stand on any other equipment while you are servicing other equipment on
the rack.
WARNING: Slide / rail (LCD / KVM) mounting equipment can not be used with support brackets
or work areas.
