4/8/16 Port USB/PS2 Rack Mountable KVM Switch User Manual
21
The cascade mode, it’s the same method of keyboard, mouse and computer connectionsas
stand;alone connection, this part will not repeat them, the number part of the description is as
follows:
1. A cascaded KVM switch can be connected in two ways by using a USB KVM cable (as shown in
connection number 2 in the figure) or a PS/2 KVM cable (as shown in connection number 1 in the
figure) Connect to the upper;level switcher.
2. The number of computers connected to each level can be free to increase or decrease according
to your needs, the reference number 3 shows the connection method.
3. Between the cascade connection devices, it can be optional for remote control, can also be
handed over from the top of the KVM switch local and remote as a unified control and management
operations.
Note
: This product cascade mode is divided into two levels, so you need to set the two levels of the
OSD menu hot;key for two different hot;key combination, or cascade can not start the OSD (Refer
to the OSD chapter for details on the OSD Hot Key settings.)
