4/8/16 Port USB/PS2 Rack Mountable KVM Switch User Manual
23
Manual Selection
Use the buttons on the front panel for port selection.
OSD Menu Screen Selection
(Please check the OSD Operation Chapter for more information)
Hot key Selection
This product offers four methods for hot;key switching:
【
SCRLL
】
+
【
SCRLL
】
+
【
NUM
】
【
CTRL
】
+
【
CTRL
】
+
【
NUM
】
【
SHIFT
】
+
【
SHIFT
】
+
【
NUM
】
The default hot;key toggle key combination is
【
SCRLL
】
+
【
SCRLL
】
+
【
NUM
】
, the
【
NUM
】
is the
keyboard no. 1;16, after the keyboard combination hot;key input is finished, press
【
ENTER
】
to
completes the command transmission, KVM switch will switch the corresponding number of the
port computer. If you want to change the key combination of the hot;key, you can set and change
the corresponding options in the OSD menu. (Please check the OSD Operation chapter for more
information.)
Power Off and Re start
If you need to power offthe KVM switch, please do the following steps before re;starting:
1. Unplug the power supply to the KVM.
2. Shut down all the computers connected to the KVM switch.
3. Wait about 10 seconds and then reconnect the KVM switch.
4, turn on the computer power.
Note
: If the PS/2 KVM cable is connected to the PC, you must connect the PS/2 cable to the PC
before powering on. Otherwise, the keyboard and mouse will not operate normally.
